DJI
Short Pin - 17.6 mm (T100/T70P/T25P) YC.JG.QX003650
Shipping: Small Parcel, $15 Australia-wide
Call AGX Drone Distributors: 1300 916 075
About
Specifications and fitment
The 17.6 mm short pin belongs to the quick-release latches that hold the auger motor end on DJI Agras T100, T70P and T25P spreaders. The T100 and T70P spreading auger sheets picture it beside the quick-release rod, and sheet 1 of the T25P spreader diagrams groups it with the other latch pins.
| Part number | YC.JG.QX003650 |
| Fits | DJI Agras T100, T70P, T25P |
| Parts diagram | T100 spreading auger, callout 32; T70P spreading auger, callout 32; T25P spreader (sheet 1), callout 21 |
DJI names these pins by length, and the same sheets carry a 22.2 mm medium pin and a 29.4 mm long pin. With three lengths in the same area, keep the old pins in order and confirm each against its code before refitting.
Renew a pin that is bent, grooved or corroded fast in its hole. With the pin out, check that the holes it passed through are still round, because an oval hole lets even a new pin rattle and wear.
Why AGX?
We know you have a lot of options, but here's why you should shop with us.
Freight included
Kit orders are delivered to your farm anywhere in Australia at no extra cost.
Training available
Add onsite setup and training and fly the aircraft with one of our pilots before it goes to work.
Licensing help
We stay with you through the RePL, type rating, ReOC, and chemical licence rather than waving you off at the gate.
Parts on the shelf
Genuine spares stocked in Australia, so a repair is measured in days rather than weeks.
