DJI
M3 Nut (T70P/T50/T25P) YC.WJ.L00877
Shipping: Small Parcel, $15 Australia-wide
Call AGX Drone Distributors: 1300 916 075
About
Specifications and fitment
This nut is used on the DJI Agras T70P, T50 and T25P, drawn on the landing gear sheets of all three aircraft as well as the T70P arm 3 and T50 M1 and M3 arm sheets.
| Part number | YC.WJ.L00877 |
| Fits | DJI Agras T70P, T50, T25P |
| Parts diagram | T70P arm 3, callout 16; T70P landing gear, callouts 11, 30, 34 and 38; T50 landing gear, callouts 4 and 6; T50 M1 aircraft arm, callout 19; T50 M3 aircraft arm, callout 22; T25P landing gear, callouts 5 and 10 |
The M3 in the name is not an arm position: the same part, YC.WJ.L00877, turns up on the T50 M1 arm and on the landing gear. With eleven callouts across these sheets it is a good one to keep spares of. Replace any nut with a damaged thread, rounded flats or corrosion, and never reuse one that spun instead of tightening.
On the sheets it sits with parts such as the bottom rubber pad, the anti-wear sleeve and the locking piece fixing screw bolt. Unsure which nut you need? Contact us with a photo.
Why AGX?
We know you have a lot of options, but here's why you should shop with us.
Freight included
Kit orders are delivered to your farm anywhere in Australia at no extra cost.
Training available
Add onsite setup and training and fly the aircraft with one of our pilots before it goes to work.
Licensing help
We stay with you through the RePL, type rating, ReOC, and chemical licence rather than waving you off at the gate.
Parts on the shelf
Genuine spares stocked in Australia, so a repair is measured in days rather than weeks.
