DJI
Bearing - OD 21 mm (T100/T70P) YC.ST.CT000163
Shipping: Small Parcel, $15 Australia-wide
Call AGX Drone Distributors: 1300 916 075
About
Specifications and fitment
This bearing, 21 mm across its outside diameter, is a rotating support in the spinner disk assembly of DJI Agras T100 and T70P spreaders and is callout 7 on both spinner disk sheets.
| Part number | YC.ST.CT000163 |
| Fits | DJI Agras T100, T70P |
| Parts diagram | T100 spreader spinner disk, callout 7; T70P spreader spinner disk, callout 7 |
The spinner runs at speed in fine, corrosive dust and then gets hosed down, a combination that is hard on its bearings. With the aircraft powered off, turn the disk by hand: grinding, a notchy feel, side play or a wobble at the rim can all suggest this bearing is on the way out.
Order by the DJI code, since the 21 mm figure alone does not describe a bearing fully. When fitting, apply force only to the ring being pressed in, and inspect the spinner disk shaft for wear. Renew the shaft sealing ring and dustproof cover from the same sheet if they are split, as they help keep dust out of that area.
Why AGX?
We know you have a lot of options, but here's why you should shop with us.
Freight included
Kit orders are delivered to your farm anywhere in Australia at no extra cost.
Training available
Add onsite setup and training and fly the aircraft with one of our pilots before it goes to work.
Licensing help
We stay with you through the RePL, type rating, ReOC, and chemical licence rather than waving you off at the gate.
Parts on the shelf
Genuine spares stocked in Australia, so a repair is measured in days rather than weeks.
