DJI
Flow Meter Water Outlet Hose (T50/T25P) YC.JG.JS000033
Shipping: Small Parcel, $15 Australia-wide
Call AGX Drone Distributors: 1300 916 075
About
Specifications and fitment
This is the outlet-side hose of the flowmeter on the DJI Agras T50 and T25P, numbered 1 on the T25P flowmeter sheet and 5 on the T50 flowmeter module sheet.
| Part number | YC.JG.JS000033 |
| Fits | DJI Agras T50, T25P |
| Parts diagram | T25P flowmeter, callout 1; T50 flowmeter module, callout 5 |
The T100 takes its own flowmeter water outlet hose, YC.JG.JS000080, and the T70P uses a third flowmeter water outlet hose, YC.JG.JS000069. Do not confuse it with the flowmeter water inlet hose, YC.JG.JS000032, on the same sheets.
Look for splits near the ends, hardening, a kink that stays after the hose is moved, or a damp patch under the flowmeter after a job. Push the new hose fully onto its connector before doing up the hose nut, then run clean water through and watch for drips.
Why AGX?
We know you have a lot of options, but here's why you should shop with us.
Freight included
Kit orders are delivered to your farm anywhere in Australia at no extra cost.
Training available
Add onsite setup and training and fly the aircraft with one of our pilots before it goes to work.
Licensing help
We stay with you through the RePL, type rating, ReOC, and chemical licence rather than waving you off at the gate.
Parts on the shelf
Genuine spares stocked in Australia, so a repair is measured in days rather than weeks.
