DJI
Flow Meter Water Inlet Hose (T50/T25P) YC.JG.JS000032
Shipping: Small Parcel, $15 Australia-wide
Call AGX Drone Distributors: 1300 916 075
About
Specifications and fitment
Feeding the flowmeter on the DJI Agras T50 and T25P, this water inlet hose is callout 3 on the T50 flowmeter module sheet and callout 13 on the T25P flowmeter sheet.
| Part number | YC.JG.JS000032 |
| Fits | DJI Agras T50, T25P |
| Parts diagram | T25P flowmeter, callout 13; T50 flowmeter module, callout 3 |
Its partner is the flowmeter water outlet hose, which has a different code, so check which side is damaged. The T100 takes its own flowmeter water inlet hose, YC.JG.JS000088, and the T70P uses YC.JG.JS000072.
Replace the hose if it has cracked at a fitting, gone stiff, or shows a soft spot or bulge. Push it fully home on its connector, tighten the hose nut listed near it, then look for weeping at both ends the first time the pump runs.
Why AGX?
We know you have a lot of options, but here's why you should shop with us.
Freight included
Kit orders are delivered to your farm anywhere in Australia at no extra cost.
Training available
Add onsite setup and training and fly the aircraft with one of our pilots before it goes to work.
Licensing help
We stay with you through the RePL, type rating, ReOC, and chemical licence rather than waving you off at the gate.
Parts on the shelf
Genuine spares stocked in Australia, so a repair is measured in days rather than weeks.
