DJI
Auger Shell (T100/T70P) YC.JG.ZS005952
Shipping: Standard Parcel, $27 Australia-wide
Call AGX Drone Distributors: 1300 916 075
About
Specifications and fitment
The auger shell is the housing around the auger in the DJI Agras T100 and T70P spreading system, and one of the largest parts on the spreading auger diagram.
| Part number | YC.JG.ZS005952 |
| Fits | DJI Agras T100, T70P |
| Parts diagram | T100 spreading auger, callout 21; T70P spreading auger, callout 21 |
Granular product is abrasive and some fertilisers draw moisture, so anything left inside can cake and wear the surfaces it rubs against. DJI's guides show the auger motor end held by two quick-release latches; with both open, the motor end and then the auger slide out, giving access to the inside. When it is clean, look inside for grooves or thin spots and check the fixing points and mating edges for cracks.
Replace the shell if it is cracked, worn through, warped, or has broken fixing points, as any of these can let product leak or pull parts out of line. While it is apart, check the sliding bearing from the same diagram for wear.
Why AGX?
We know you have a lot of options, but here's why you should shop with us.
Freight included
Kit orders are delivered to your farm anywhere in Australia at no extra cost.
Training available
Add onsite setup and training and fly the aircraft with one of our pilots before it goes to work.
Licensing help
We stay with you through the RePL, type rating, ReOC, and chemical licence rather than waving you off at the gate.
Parts on the shelf
Genuine spares stocked in Australia, so a repair is measured in days rather than weeks.
