DJI
Payload Lifting Control Module (T100/T70P) BC.AG.SS001123
Shipping: Standard Parcel, $27 Australia-wide
Call AGX Drone Distributors: 1300 916 075
About
Specifications and fitment
The payload lifting control module is an electronic unit in the lift system of the DJI Agras T100 and T70P. DJI lists it on the same lift system winch diagrams as the three-axis force sensor, although the system carries loads on a fixed-length sling rather than a powered winch.
| Part number | BC.AG.SS001123 |
| Fits | DJI Agras T100, T70P |
| Parts diagram | T100 lift system winch, callout 12; T70P lifting system winch, callout 16 |
If the app keeps reporting a lift system fault after a restart, rule out the simple causes first. Unplug and inspect each connector for bent pins, corrosion or moisture, and look along the cables for pinches; a damaged plug can look very much like a failed module.
Remove the flight battery before disconnecting anything and confirm the code on the old module matches. DJI has delivered lift weighing and balance changes through T100 firmware updates, so check the DJI Agras app for a firmware update once the new module is in. The three-axis force sensor module sits in the same assembly if the fault points there instead.
Why AGX?
We know you have a lot of options, but here's why you should shop with us.
Freight included
Kit orders are delivered to your farm anywhere in Australia at no extra cost.
Training available
Add onsite setup and training and fly the aircraft with one of our pilots before it goes to work.
Licensing help
We stay with you through the RePL, type rating, ReOC, and chemical licence rather than waving you off at the gate.
Parts on the shelf
Genuine spares stocked in Australia, so a repair is measured in days rather than weeks.
