DJI Mavic 3 Multispectral

See what your crops can't tell you. The DJI Mavic 3 Multispectral (M3M) puts a 20MP RGB camera and four dedicated multispectral sensors on one sub-1kg foldable airframe, capturing crop health data invisible to the naked eye, weeks before stress shows up as symptoms.

One 43-minute flight covers up to 200 hectares, every image tagged with centimetre-accurate RTK positioning and corrected by the built-in sunlight sensor so your NDVI maps stay comparable week after week, season after season.

Two cameras. One flight. Every answer.

• 20MP RGB camera: 4/3 CMOS with mechanical shutter, the same proven optics family as the Mavic 3 series
• 4 × 5MP multispectral sensors: Green (560nm), Red (650nm), Red Edge (730nm) and Near-Infrared (860nm), captured simultaneously with the RGB image
• Sunlight sensor: records solar irradiance into every image, so vegetation index values stay consistent across changing light and repeat missions
• Built-in RTK: 1cm + 1ppm horizontal accuracy with microsecond camera sync; centimetre-level maps without laying a single ground control point
• Live NDVI in flight: view NDVI, GNDVI and NDRE in real time on the controller through DJI Pilot 2

From map to prescription to spray drone

The M3M is the intelligence half of a precision spraying system. Fly the field once, process the imagery in DJI Terra or SmartFarm, and turn the vegetation index map into a prescription map. Load that prescription into your Agras T50 or T100 and it applies chemical only where the crop needs it, variable-rate spraying that cuts input costs while lifting yield. For orchards, Terra reconstructs the canopy in 3D and generates terrain-following routes your spray drone flies automatically.

It also plays well beyond the DJI ecosystem: Pix4Dfields, Solvi, Aerobotics and the DJI Cloud API are all supported.

Why operators choose the M3M

• 200 ha in a single flight: scout at a scale no ute or quad bike can match
• Sub-2kg take-off weight: operates in Australia's lightest regulatory category, no ReOC required for excluded-category work
• Tree counting and orchard intelligence: automatic tree identification and counting on slopes with terrain follow
• Season-over-season comparison: automated repeat missions with consistent framing catch emergence gaps, weed pressure and lodging early
• Still the only one: as of 2026 the M3M remains DJI's only integrated multispectral drone; the Matrice 4 series doesn't offer a multispectral variant

Specifications

RGB camera	4/3 CMOS, 20MP, mechanical shutter
Multispectral bands	Green 560nm · Red 650nm · Red Edge 730nm · NIR 860nm (4 × 5MP)
Positioning	Built-in RTK, 1cm + 1ppm (H), 1.5cm + 1ppm (V)
Max flight time	43 minutes
Coverage per flight	Up to 200 ha
Take-off weight	951 g (with RTK module)
Transmission	DJI O3 Enterprise, 1080p live feed
Controller	DJI RC Pro Enterprise (included)
Wind resistance	12 m/s
Operating temperature	-10°C to 40°C (not weather-sealed, don't fly in rain)

12 months of DJI Care Enterprise Basic

The price includes 12 months of DJI Care Enterprise Basic. If the drone is damaged in a collision, by water or by a mistake at the controls, DJI swaps the damaged aircraft, controller or other covered parts for new or as-new ones, up to twice in the 12 months, each time for a fixed DJI replacement fee. A replacement can cover the aircraft, camera gimbal, RTK module, RC Pro Enterprise controller, a battery and propellers. Damage from flying in unsuitable conditions, such as rain, is excluded. Basic has no flyaway cover, and DJI pays the freight both ways within Australia. Care covers accidents: DJI's standard warranty still covers faults.